Architectural Guidelines

The Covenants, Conditions & Restrictions (CC&Rs) grant the Issaquah Highlands Community Association (IHCA or Community Association) the legal authority, “to review and approve or disapprove the details and written plans and specifications showing the nature, kind, shape, height, material, colors, and location of proposed Living Units, buildings, fences, walls, or other structures, exterior additions to or changes or alterations therein, clearing or excavation of Lots or cutting of trees within Issaquah Highlands.” The Community Association vests such architectural review authority to the Architectural Review Committee (ARC).

The Issaquah Highlands Architectural Standards were created by the Declarant (Grand Ridge LLC) and Port Blakely Communities to provide design guidance and standards for builders and homeowners pursuant the CC&Rs. The Declarant has granted the IHCA Board of Directors (BOD or Board) governance over the Architectural Standards and together, both parties work to evolve the guidelines as the community matures.

The ARC shall consist of at least five, but not more than seven persons who are appointed by the IHCA Board. Persons shall serve and may be removed and replaced in the Board’s discretion. The members of the ARC need not be Members of the Residential Association or representatives of Members, and may, but need not, include architects, engineers or similar professionals, whose compensation, if any shall be established from time to time by the Board.

Article 4.4 in the CC & R’s states:
“Each Owner acknowledges that the persons reviewing applications under this Article will change from time to time and that opinions on aesthetic matters as well as interpretation and application of the Architectural Standards, may vary accordingly. In addition, each Owner acknowledges that it may not always be possible to identify objectionable features of proposed work until the work is in progress or completed, in which case it may be unreasonable to require changes to the improvements involved, but the Reviewer may refuse to approve similar proposals in the future. Approval of applications or plans for any work done or proposed, or in connection with any other matter requiring approval, shall not be deemed to constitute a waiver of the right to withhold approval as to any similar applications, plans or other matters subsequently or additionally submitted for approval.”

The purpose of this section is to establish standard review procedures and submittal requirements for all exterior improvements on single-family and multi-family properties. The procedures and requirements are designed to promote timely and complete reviews by the ARC. Architectural Review Applications must be approved by the ARC prior to commencing any work.

No proposed modification requiring ARC approval should be initiated until the approval process is complete and written or emailed notification has been received. Applications received after a project is started are not valid and may result in removal and restoration at the owner’s expense as well as applicable fines. It is the property owner’s responsibility to determine if government body (City of Issaquah or other governmental) approval is required. Approval by the appropriate government body does not relieve the property owner of responsibility to obtain ARC approval nor does ARC approval relieve the property owner of responsibility to obtain all required governmental approvals. The following review fees are non-refundable.

• Application Review: $20 if required.
• Remodeling/Additions: $100
• Major landscaping inspection fee (usually involving motorized equipment): $65

Some projects do not require a formal ARC committee review such has painting the home the same color. However, those projects still require a completed ARC application be submitted for review. An IHCA Community Manager assigned as the ARC committee liaison will review all applications at time of submittal to ensure that all required information has been supplied. Sometimes clarifying information, sample of paint applied to home, and materials samples are required before the committee can make an informed decision.  The ARC liaison will notify the applicant of the approval or denial via a postcard and/or by email within 30 days of the submittal. Once the applicant has received notification, they may proceed with the project with one year to complete it.

The applicant has the responsibility to ensure their project falls within the IHCA Community Architectural Standards. An onsite meeting can be requested for any project. The review provides consultation time with the community manager and a review by the members of ARC. The process ensures compliance with ARC standards.

Application Process
The application process requires completion of the Issaquah Highlands ARC Application, Submittal Checklist, ARC Application Checklist, and Acknowledgement of Applicant forms. Applications may be found at the community website – www.IssaquahHighlands.com or obtained from the IHCA offices. The Applicant is required to supply the ARC with all items the ARC Application Checklist requires. Contact the IHCA Community Manager with any questions.

Formal Application Review Process
Delivery of the ARC application package is required to be received by the ARC at least seven (7) days prior to the next scheduled ARC meeting. ARC meetings are regularly held on the first Tuesday of each month. Any application received less than seven (7) days prior to the next scheduled ARC meeting, may not be reviewed and considered by the ARC until the ARC meeting for the following month. The application can be mailed or dropped off at the IHCA Office at the address set forth below:

Contact Information:
Email: info@ihcommunity.org

Mailing Address:
IHCA ARC
c/o IHCA Offices
2520 NE Park Drive, Suite B
Issaquah, WA 98029

There are specific guidelines for residents who live in either the Harrison Street or Grand Ridge Neighborhoods. Application for ARC review should refer to those guidelines as well as the general ARC guidelines.

Download Harrison Street ARCH Standards >>

Download Grand Ridge Drive ARCH Standards >>

ARC approval is not required for repairs or replacement of exterior items that use identical materials as were used in the original construction or added after the original construction (and written ARC approval was obtained). Examples of this may be repairing a cracked walkway with exposed aggregate, repainting of a home in the original colors (a color that has been previously approved), and replacing a broken light fixture with an identical fixture. Contact the IHCA Community Manager for guidance on deciding if an application to the ARC is required.

• Examples of Major Alterations include the following projects:
• Accessory structures requiring a building permit
• Room Additions
• Second-Story Decks
• Swimming Pools
• Attic Ventilators
• Chimneys & Metal Flues
• Roof Alterations
• Garages & Carports

Major features of the house (such as vertical and horizontal lines, projections, trim details, gutters and downspouts, drainage, and materials to be used) must be reflected in the design of the addition. All alterations must be compatible with the original house and the neighborhood setting in style, materials and color. Attic ventilators, or other mechanical apparatus requiring penetration of the roof, shall be as small as functionally possible, shall be painted to match the roof, shall be located on the rear of the house whenever practical, and shall not extend above the top of the roof line.

Major alterations represent a substantial cost. The best way to start this process is to do the following:

1. Contact the City of Issaquah to determine any city codes that may affect planned alterations. Do not apply for a building permit until after the ARC approval.Submit an application to the ARC. The application should include as much information as is practical, but must include at least a site plan showing location of structures, dimensions, elevations, property lines as well as renderings and/or photographs of the property involved.
2. Once the ARC application is approved, proceed to acquiring building permits through the City of Issaquah as required.

Accessory structures include sheds, workshops and other buildings attached or unattached to your home. The City of Issaquah has detailed code requirements for accessory structures in the Issaquah Highlands. All accessory structures must be located only in the rear yard or side yard. Generally, accessory structures attached to your home will require a building permit so please check with the city. Detached structures of 120 square feet and 6 feet or less in height that are set-back five feet from the home and four feet from any property line do not require a building permit.

Accessory structures are required to blend with the house and maintain continuity of materials and color. Metal accessory structures are not allowed. If the structure creates an adverse visual effect from the street or from an adjacent home, the ARC may decline the application or require a fence to be built or placement of landscaping to screen the structure. Materials and colors must match or be compatible with the house and fence to which the structure is attached or near. This includes siding, roofing, paint or stain, and construction details such as trim and roof pitch.

Air conditioner installation requires notification only and is not subject to a $20 review fee. However, voluntary ARC reviews may be requested. Such reviews provide consultation time with the IHCA Community Manager and a review by the ARC. The process ensures compliance with ARC standards.

Please complete the application for Air Conditioners, Heat Pumps, and Generators showing location, brand and style of air conditioner and documented decibel rating. Applications must be submitted prior to air conditioner installation. The Applicant is required to submit a Completion Verification Form. It is advisable to retain copies as the Applicant is responsible for proof of notification and completion.

Air conditioners/heat pumps may be located on the side or rear of your home. The unit’s noise rating must be below seventy-five (75) decibels. Tubing and wiring attached to the home must be painted to match the house color.

Window air conditioning units must be mounted flush to the window and not allowed to protrude externally.

Requests from condominium homeowners must be submitted with written approval from the condominium association’s Board of Directors in order for the request to be eligible for consideration.

All decks must be compatible with the house in materials and color. Decks may be constructed of natural wood or composite decking materials (i.e. Trex). If natural wood is used, it must be painted or stained. All decks require ARC approval.

Machinery, equipment, and personal items may be stored under the deck only if the deck is enclosed by lattice or landscaping screening and these items are out of view of the neighbors.

Obstructing or redirecting the flow of drainage is prohibited. Any alteration to houses or lots, that may change existing drainage patterns onto adjacent lots, is prohibited without the approval of the appropriate governmental agency. Refer to the section covering the project planned for any specific guidelines for drainage.

Only hard, stabilized surfaces of concrete or masonry will be considered. No other material will be approved. The creation of additional parking spaces is not permitted. Special care must be exercised if changes alter drainage patterns. Runoff must be disposed of within the boundaries of the homeowner’s property.

Lighting that is not part of the original structure and/or changes in original lighting that are not compatible in style, scale, and color to the original lighting must have ARC approval. This shall include all walkway and landscape lighting not installed by the original builder.

The application should specify location of lighting on the property, height of light fixtures above the ground, wattage, and detailed descriptions of the fixtures.

Lighting shall not be directed outside the homeowner’s property lines or towards adjacent homeowners’ windows except to light adjacent sidewalks or paths.

Outdoor recreational fires are allowed only in professionally manufactured and/or installed natural gas or propane fire pits or fire places.

1. General fence requirements:
   1. Wood fences and screens shall be painted or stained when constructed and repainted/stained as necessary.
   2. Fences, walls, and screens built on slopes greater than 15% and visible from a public space or common area shall step in sections.
   3. Fence designs shall have a desirable appearance from both sides except when one side is adjacent to a critical area and not visible from a public area.
   4. Fences shall be constructed using high quality workmanship and high quality construction materials.
   5. Metal fences must be powder coated or vinyl coated black
2. Front yards:
   1. The combined height of a fence, rockery, or retaining wall located in a front yard shall not exceed 42 inches.
   2. The only fence style permitted in a front yard is a picket fence or similar open-style fence (see examples f, g, h, I, and k in Exhibit B)
3. Side and rear yard fences adjacent to public spaces or common areas:
   1. Public spaces or common areas are defined as the following:
      1. Streets
      2. Sidewalks
      3. Trails
      4. Parks
      5. Open Space including Critical Areas
   2. Fences and screens over 48 inches in height in a side or rear yard and adjacent to public space or common area shall be either:
      1. At least 50% visually permeable for the portion above 48 inches (see examples a, b, c, d, and e in Exhibit B); or
      2. At least 50% visually permeable for 50% of the entire fence surface area; or
      3. At least 50% visually permeable for the entire fence surface area (see examples h, i, and j in Exhibit B).
   3. Fences and screens 48 inches or less in height may be either solid style or open style.
4. Side and Rear Yards:
   1. “Living fences” made up of trees or shrubs on side or back yards must not exceed eight (8) feet in height.
   2. Wood and Metal fences in side or back yards may not exceed six feet (6) in height.
   3. Side yard fences must be set back at least five (5) feet from the front corners of the house or garage unless connected to a front yard fence, hedge, or wall.

Side yard fences attached to the house must have an opening or a gate on at least one side of the house to allow for access between front and back yards. (See diagram below.)

5. Fences adjacent to alleys, joint use driveways, or private access tracts:
   1. In order to provide adequate backing-out distance in alleys, fences shall be set back at least four (4) feet from the edge of alley right-of-way or thirteen (13) feet from the centerline of the alley, whichever is greater, when located across from and in the vicinity of a garage, parking space, or other vehicle access point.
   2. Fences located in or adjacent to joint use driveways or private access tracts shall be set back a sufficient distance from the property line to provide adequate travel and/or back-out space.
6. Gates:
   1. Gates shall be accent elements and may be constructed of compatible or contrasting materials.
   2. Gates may exceed the fence height.
7. Fence and Gate Stain/Paint Colors:A semi-solid color stain (film-forming opaque stain) is a permanent application and will fail by cracking and peeling. They also have a tendency to chalk. When applied correctly, a semi-transparent stain (penetrating, low-hide stain used for changing the color of the wood) will fail by erosion, but will not crack or peel Semi-transparent stains tend to erode rapidly in areas where there is a lot of weathering (like the south and west sections of the house), and not as much in better protected areas (under eaves, awnings, and north side of the house).
   1. Pre-approved stain/paint colors are as follows and colors can be found in Appendix A: Cabot Semi-Solid or Semi-Transparent Stains (Cabot stains can be purchased at Lowes)
      • Dune Gray
      • Dark Gray
      • Taupe
      • Chestnut Brown
      • New Redwood
      • Cordovan Brown
   2. Stain or paint color must accompany submittal package for ARC review.
   3. Other stain or paint colors (except white) may be used, but are subject to ARC review and approval.
8. Fence and Gate styles:
   1. Pre-approved styles can be found in Appendix B. Other fence or gate styles may be used, but are subject to ARC review and approval. Please submit photograph of style or reference style letter on application.

All permanent flag poles must be made of powder coated metal, aluminum or of fiberglass and must be securely mounted, in the ground. No banner arms or horizontal mounted flag poles are permitted. Flag poles must have an internal rope halyard system to minimize noise. Powder coated flag poles must be either an unobtrusive neutral color or the color of the house.

This does not cover non-permanent flags and pennants displayed on a temporary basis from a bracket affixed to a dwelling.

All arbors pergolas, gazebos, patio covers, and sun control devises require ARC approval prior to installation. Awning material and framing must be compatible with the house color. Wooden structures must be constructed of a rot-resistant wood and painted or stained. Metal structures must be powder coated. Composite decking materials (i.e. Trex) are acceptable. A sample of the color must accompany your application.

All hot tubs/spas must be located in the rear of the property and must incorporate a cover with securing mechanism. Hot tub and gazebo framing structures must be made of wood or similar composite/synthetic material and in a color compatible with the color of the house Issues taken into consideration are noise, size/location (including gazebo coverings), windows and softening by landscaping.

Seasonal color added to landscaping does not require ARC review and approval. Minor changes to landscaping require an application but do not require a formal review. However, to insure compliance with ARC Guidelines, an ARC review is encouraged.

A reasonable number of seasonal planters or pots does not require ARC approval, however if pots are intended to be permanent, an ARC application may be required for approval.

See recommended tree, plant and shrub list in Appendix C for information on acceptable additions to residential landscapes at Issaquah Highlands.

Landscaping can be effectively used to accent driveways, define space, create “soft” privacy screens, and reduce the visual impact of fences, and sheds. Since landscaping is a design element, consideration should be given to relationship to the applicant’s house and the neighborhood setting.

Homeowners are urged to consider their neighbor’s view when landscaping and the size and maturity of trees and plants being considered. Special care must be exercised if changes alter drainage patterns. Runoff must be disposed of within the boundaries of the homeowner’s property.

Applicants are reminded that Washington law requires the owner or their contractor to call the Underground Utility Locator Service at 1-800-424-5555 at least two business days prior to digging 12” or deeper.

Issaquah Highlands has been designed to three neighborhood types (see Appendix D for Division Map):

• House and Garden
  • All Divisions besides the ones listed below
• Cottage Lane
  • Division 24 and 25 Crofton Springs
  • Division 48 and 52 Crofton 2
• Traditional Townscape
  • Division 42 Concord Commons
  • Division 54 Outlook
  • Division 96 Villaggio
  • Division 53 and 77 Roanoke Ridge
  • Division 93 Roanoke Woods
  • Division 32, 44 and 45 Manchester Court
  • Block 8c Brighton on Park
  • Block 10a and 11a Brighton on High Street
  • Block 10b and 11b Ashford

Each neighborhood type has a specific set of landscape standards to which the neighborhoods vision was created. Please see the three neighborhood Landscape Standards below:

HOUSE AND GARDEN

Landscaping in the house and garden neighborhood is typically lawn, trees and evergreen groundcover. A front lawn with evergreen foundation shrubs forms the basic landscaping.

Residential Landscaping
Encouraged

•  The use of lawns in front yards or well-manicured shrubs.
• An uninterrupted flow of landscaping between houses and the sidewalk by placing elements such as gardens and patios close to the front of the house or in a side or rear yard.
• The use of elements such as arbors, trellises, sundials, pergolas, low masonry walls, and bird baths to add interest and scale to the landscape.

Discouraged

• Large expanses of impervious surfaces.
• Large expanses of bark or mulch.

Specific Standards:

• Plant materials shall be a combination of ornamental, native and drought-tolerant varieties adapted to the climatic conditions of Issaquah Highlands.
• Planting areas should consist of 75% lawn or evergreen groundcover.
• Low hedges used as screens shall have a maintained maximum height of 42 inches.
• Trees shall be a variety tolerant of selective pruning without topping.
• Trees and large shrubs shall be set back from house facades.
• Trees and large shrubs should be located so as not to block views from interior rooms or adjacent properties.
• Evergreen plant materials shall be used to screen exposed house foundations.
• Minimum plant sizes at installation. [Refer to Plant Size and Spacing Requirements]

Hillside Landscaping: (Landscaping considerations when house lot slope exceeds 15 %.)

• All slopes over 3:1 must have non-mowable grasses and/or groundcovers in lieu of lawn.
• Slopes between 4:1 and 2:1 that are visible from public spaces must have mass plantings of shrubs and trees.
• Slopes over 2:1 must have jute matting in addition to non-mowable grasses and/or groundcovers. Mass plantings of shrubs and trees also are required if the slope is visible from public spaces.

COTTAGE LANE

Landscaping in the cottage lane neighborhood occurs in the shared space areas: either in areas shared between pedestrians and vehicles or in areas for pedestrians and residents. Areas shared with vehicles are planted with durable materials and include elements that provide visual relief. Areas without vehicles can contain more versatile landscaping.

Residential Landscaping

Encouraged:

• Landscaping in all shared space areas.
• Hardy and flowering plans which naturalize and self-seed.
• Plantings to soften house and pavement surfaces, such as shrubs grown tightly and trained against house wall, and groundcovers along or in travel ways.
• Trees that provide visual interest and seasonal shade such as deciduous flowering trees and fruit and nut trees with spreading forms.
• Raised garden beds with “nontoxic” wood or stone edges.
• The use of vertical garden structures such as trellises to support flowering climbing vines.
• The use of window boxes planted with bright varied colored annual and perennial flowers.

Discouraged:

• Lawn except in shared open spaces with common pedestrian use.
• The use of toxic “used” railroad ties in landscape and garden areas.
• Large expanse of impervious surfaces.

Specific Standards:

• Plant material shall be a combination of ornamental, native and drought-tolerant varieties adapted to the climatic conditions of the Issaquah area.
• The use of “old-fashioned” plants; such as roses, lilacs, lavenders and alyssum.
• Planting areas shall contain a minimum 30% perennial variety.
• Perennial plants shall provide borders for pedestrian circulation areas and common outdoor spaces.
• Low hedges used as screens adjacent to public space or shared common space shall have a maintained height of 42 inches.
• All areas not devoted to vehicle or pedestrian circulation shall be landscaped with plant materials.
• Trees placed so as not to block views or sun from adjacent properties.
• Provide flowering bulbs in groundcover areas and perennial beds.
• Plant window boxes and planters with perennials, annuals, vegetables and herbs
• Climbing vines shall be flowering varieties and may be grown on fences, arbors, walls, screens and trellises.

Hillside Landscaping (Landscaping considerations when house lot slope exceeds 15 %.)

Encouraged:

• Screening of houses from distant views.
• The use of native or drought tolerant groundcovers and wildflowers.
• Low terraced retaining walls with landscape elements.
• Maintained outward views over the trees from homes and outside gardens.

Discouraged:

• The use of lawn on slopes greater than 25%.
• The use of trees that need to be “topped” to maintain view corridors.

Specific Standards:

• Trees shall be a variety tolerant of selective pruning without topping.
• Evergreen plant materials shall be used to screen exposed house foundations.
• The under and /or structural portion of all decks, terraces and cantilevered structures over slopes shall be screened with evergreen plant material and/or lattice.
• Provide groundcover plant material with sufficient spacing to control surface water runoff and prevent erosion and sedimentation.
• Provide native or drought tolerant groundcovers and wildflowers on slopes exceeding 25%.
• If used, retaining wall terraces shall be stepped to provide planting areas.
• Provided plant materials at the base of walls, planted to climb walls or planted on top to cascade over walls.
• Plant material used in combination with walls shall be minimum 80% evergreen varieties.
• Integrate walks, stairs and paths with terraces walls to traverse slopes.

TRADITIONAL TOWNSCAPE

Landscaping in the traditional townscape neighborhood provides year-round greenery and an element of formality for areas adjacent to public spaces. The private landscaping adjacent to public spaces defines the private space and provides visual relief and interest to the building facade.

Residential Landscaping

Encouraged:

• The use of columnar trees with precise forms.
• The use of evergreen plants with fine texture for year-round appeal.
• The use of small evergreen hedges to establish order and strong lines of symmetry.
• The use of annual flowers as accents.
• Plant window boxes and planters with perennials and annuals.
• House entry walkways to connect with public sidewalks.

Discouraged:

• The use of deciduous shrubs.
• Large expanses of impervious surfaces.

Specific Standards:

• Plant material shall be ornamental varieties adapted to the climatic conditions of Issaquah Highlands.
• Plant materials shall be minimum 80% evergreen (conifer and broadleaf evergreen) adjacent to public space.
• Plantings located adjacent to the house foundation shall be closed form and tightly massed.
• Plant material shall have a maturity which remains proportionate with the scale of the house.
• Trees placed so as not to blocks views or sun from adjacent properties.
• Formal evergreen hedges adjacent to public space shall have a maximum maintained height of 48 inches.
• Evergreen groundcover shall be used in shaded areas and on slopes over 25%.
• All areas not devoted to vehicle or pedestrian circulation shall be landscaped with plant materials.
• Incorporate flowering bulbs in groundcover areas.
• Climbing vines shall be evergreen varieties and may be grown on fences, buildings, arbors, screens and trellises.

Hillside Lanscaping: (Landscaping considerations when a house lot slope exceeds 15 %.)

Encouraged:

• Screening of houses from distant views.
• The use of evergreen groundcover on slopes.
• Low terraced retaining walls with a variety of landscape elements.
• Maintained outward views over the trees from homes and outside gardens

Discouraged:

• The use of lawn on slopes greater than 25 %.
• The use of trees that need to be “topped” to maintain view corridors.

Specific Standards:

• Trees shall be a variety tolerant of selective pruning without topping.
• Evergreen plant materials shall be used to screen exposed house foundations.
• The under and/or structural portion of all decks, terraces and cantilevered structures over slopes shall be screened with evergreen plant material.
• Provide groundcover plant material with sufficient spacing to control surface water runoff and prevent erosion and sedimentation.
• Provide native or drought tolerant groundcovers and wildflowers on slopes exceeding 25%.
• If used, retaining wall terraces shall be stepped to provide planting areas.
• Provide plant materials at the base of walls, planted to climb walls or planted on top to cascade over walls.
• The plant material used in combination with walls shall be minimum 80% evergreen varieties.
• Integrate walks, stairs and paths with terraced walls to traverse slopes.

SYNTHETIC AND ARTIFICIAL TURF

Overview
While drought tolerant landscapes consisting of natural vegetation are encouraged throughout Issaquah Highlands limited use of artificial and synthetic turf may be allowed subject to the following conditions. For low maintenance landscape alternatives and approved drought tolerant species, see Appendix C.

Application
All synthetic turf shall be subject to the following conditions and shall be subject to review and approval by the Issaquah Highlands ARC prior to installation. Synthetic and artificial turf may be used in the following applications:

Front, Side, and Rear Yards

1. Use of artificial turf in the front yard shall be limited to discrete areas and must always be used in conjunction with living plants and other foliage to create a balanced and comprehensive landscape scheme.
2. Artificial turf may be used in side yards not visible from a public right-of-way.
3. Artificial turf may be used in rear yard; however, such use shall not exceed the lesser of 25% of the usable yard or 250SF.
4. All edges of the artificial turf must be bordered by pavers, concrete curbing, treated lumber, or other non-deteriorating material subject to review and approval by the ARC.
5. Artificial turf shall not immediately abut concrete walkways, sidewalks, or driveways.
6. Artificial turf shall be required to meet the minimum product specification outlined below.
7. Artificial turf must be maintained free from animal waste that may saturate, penetrate or rest upon the surface.
8. Artificial turf must be maintained free from weeds or other vegetation that may protrude through the surface of the product.
9. Artificial turf must be replaced with similar, approved material, or other approved living vegetation upon product expiration according to the product manufacturer’s warranty.

Specifications
Synthetic turf shall meet the following minimum specification:

1. Thickness – Pile height or synthetic grass blades shall be 1-1/2” to 2” minimum.
2. Face Weight – Face weight or density shall be a 60LB minimum.
3. Color – Pile, synthetic grass blades, shall be a made up of a minimum of two colors or shades.
4. Blade Length – Pile, synthetic grass blades, shall be made of a minimum of two different blade lengths.
5. Product Warranty – artificial turf shall be covered by a 15-yr product manufacture warranty.

Installation
All synthetic and artificial turf shall be installed by a licensed, professional contractor with demonstrated experience working with artificial turf products. Installation must be covered by a minimum 15-year installation warranty.

No application or review is required for re-painting any part of the house with its original or existing color scheme. Prior ARC approval is required for new colors or any changes in exterior colors for houses, fences, decks, trim, and roofs in advance. Color chips (samples) must be submitted with the application along with a detailed description of where the colors are to be applied (trim, body, and doors, et al.), along with a photo of the home. Painting with a single exterior color is discouraged. Every attempt should be made to paint the exterior to blend with the surrounding neighborhood’s architectural elements and colors. Owners are encouraged to complement existing external building materials such as brick or stone by choosing subtle paint colors for contrast on the home’s body, trim, garage, and doors. Subtle contrast provides depth which will complement the overall home.

Color blocking (colors ending on an outside corner) is prohibited; all paint colors and materials shall end at inside corners of the structure. Colors must follow the existing architecture.

Patios must be located primarily in rear yards. Material shall be brick, stone or concrete. Mitigation of any possible adverse effects of drainage changes must be shown on the application. Homeowners shall be responsible for mitigation of any adverse effects of drainage changes after completion of patio construction.

Pet houses must be compatible with the homeowner’s house in color, material and size, and must be located where they will be visually unobtrusive and will have the least impact on neighbors for visibility, noise, and smell. Generally, this means away from shared property lines.

Chain link fences for dog runs will only be considered if inside solid privacy fencing, softened by supplemental landscaping, and well screened.

Enclosures to confine pet(s) in an area less than the entire back yard must be placed in a location where minimum nuisance and inconvenience is caused to neighbors, and away from shared property lines and living areas of neighborhood residences.

The following are expressly prohibited in all areas of Issaquah Highlands:

Antenna
Short-wave radio and television antennae and all similar devices are not allowed on private or rental residences in Issaquah Highlands

Clotheslines
Clotheslines of any type or style are not allowed within Issaquah Highlands.

Drainage
Obstructing or retarding the flow of drainage is prohibited. Any alteration to houses or lots, which may change existing drainage patterns onto adjacent lots, is prohibited without the approval of the appropriate governmental agency.

Temporary Structures
Temporary structures are not allowed on any lot within Issaquah Highlands.

Trash, Building Materials
Lumber, used building materials or litter of any kind may not be stored on any lot in Issaquah Highlands. Excess material and debris must be removed immediately after completion of any construction project that has been approved by the ARC.

View

View

View

View

View

View